← Back to Construction

CONSTRUCTION

MF Ceiling Calculator

Estimate plasterboard, primary channels, ceiling sections and perimeter channel for a simple MF suspended ceiling.

Boards—
MF5 sections—
MF7 channels—
MF6 perimeter—
Enter your dimensions to calculate.

How it works

Boards

Board area is used to estimate sheet count plus waste.

MF5

Ceiling sections are estimated at approximately 400 mm centres.

MF7

Primary channels are estimated at approximately 1200 mm centres.

Planning estimate only. Site conditions, manufacturer systems and specification requirements can change actual quantities.

CALCULATOR GUIDE

How the MF ceiling estimate works

The calculator lays out MF5 ceiling sections at 400 mm centres and MF7 primary support channels at a maximum 1200 mm centres, includes the edge runs, and applies the selected waste allowance to MF5, MF6 and MF7 ordering quantities.

Perimeter details, hangers, bulkheads, changes in level and manufacturer-specific systems can affect the final take-off.

What the MF take-off is doing

MF5 and MF7 are laid out as channel runs rather than estimated from area alone, including edge runs before the selected waste allowance is applied. MF6 follows the ceiling perimeter. The result is a planning take-off and should still be checked against the project ceiling specification, loading and manufacturer system detail.

Reviewed: 13 August 2026Method: run-based grid take-off · Waste applied to MF5, MF6 and MF7How Calculate This checks calculators